Why We Require Lift Stations for Handling Sewage?

In Houston, there are companies that are into designing, manufacturing, and supplying complete lift station packages that include all electrical, mechanical, structural and communications for any application. Numerous wastewater lift station projects are specifically used to handle sanitary sewer, an important aspect of water infrastructure. Generally, a wastewater lift station in Houston is used when gravity pipelines are not available or not possible to move sewage to a regional or local water treatment plant. Ideally, water treatment is always situated where gravity lines can able to reach it, but today in the US, various circumstances make lift stations a necessity.

The first thing you need to understand is that new water treatment plants are costly. Sewer plants treat unsanitary water and unable to return safely to the water cycle. For this to be operational, plants require large tracts of land and various equipment, excluding operational costs. Due to these costs, it is impractical to expand water districts and municipalities for adding new treatment plants for commercial developments and new housing. But the newly constructed buildings still need to be connected to a functional sewer system. This means moving sewage to the gravity system of an old treatment plant.

The next thing to consider why the wastewater lift station in Houston is required is the best land for development has probably been built on. This means as urban regions start expanding, new buildings are located far away from the central sewer infrastructure. We can say that today, the new construction cannot be tied into a gravity system. In some places, there are hills or other geographic features between gravity sewers and new construction. In some other places, the land is so flat that the only way for creating a gravity line is digging down deeper and deeper. This may sound simple, but to actually dig and install deep infrastructure is quite difficult.

Typically sewage needs to flow at about 2-feet per second for preventing the sewage from becoming septic. This is equal to a 2% slope for the sewer lines. This means every pipe of 100 feet needs to drop 2 feet. By the timeline touches 10-feet deep, the installation charges increase steadily. These gravity lines become more expensive when they are installed at deeper levels. This means the damaged or leaking pipes are more expensive to replace or repair in the future. At a certain level, cost ratios vs distance vs depth make it much affordable for pumping sewage up to a higher elevation where gravity can resume. Therefore, lift stations avoid the requirement for deep gravity lines by lifting sewage to elevated levels where gravity lines are less costly.

Typically, a customer can expect a life span of 15 to 20 years or more from steel lift stations. In most cases, this is more than adequate as the anticipated flow rates are designed for only ten years of expansions. Lift stations made of steel are coated with a high solid epoxy paint system and further safeguarded by anodes for deterring cathodic action.

 

Drane Ranger offers liquid waste management services including grit and lint trap cleaning, grease trap odor control, lift station and wet well cleaning, septic tank cleaning, wash bays for equipment, vacuum truck services, etc. in Houston, Manvel, Alvin, and Pearland. To more know, visit http://draneranger.com/services/.

Comments

comments

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *